7. Overdrive Clutch and Coast Clutch Preliminary Check

Overdrive Clutch and Coast Clutch Preliminary Check





1. Measure piston stroke.
Install forward clutch assembly and overdrive / coast clutch assembly (2) to transaxle rear cover (1).
2. Measure overdrive clutch piston stroke while applying and releasing compressed air (400 - 800 kPa, 4 - 8 kgf/cm2, 57 - 113 psi) through oil hole (3) by using special tools.
Special Tool
(A): 09900-20606
(B): 09900-20701
Overdrive clutch piston stroke
Standard: 1.04 - 1.36 mm (0.041 - 0.054 inch)
If piston stroke exceeds specified value, disassemble and inspect inner parts.





3. Measure coast clutch piston stroke while applying and releasing compressed air (400 - 800 kPa, 4 - 8 kgf/cm2, 57 - 113 psi) through oil hole (1) by using special tools.
Special Tool
(A): 09900-20606
(B): 09900-20701
Coast clutch piston stroke
Standard: 2.68 - 3.02 mm (0.106 - 0.119 inch)
If piston stroke exceeds specified value, disassemble and inspect inner parts.