Front Door Window Regulator: Service and Repair

Front Door Window Regulator Removal and Installation

Front Door Window Components:

Removal
1. Remove door glass.
2. Disconnect power window motor lead wire at coupler and loosen clamp.
3. Loosen regulator mounting bolts (1) and nuts (2), and then remove front door window regulator (3).







Installation
Reverse removal procedure noting the following instruction.
- Apply grease to sliding portions of window regulator.
: Grease 99000 25010

- Tighten front door window regulator attaching bolts to proper tightening order.

Front door window regulator bolt tightening order
(a)-> (b) -> (c)