Power Sunroof Removal and Installation

Power Sunroof Removal And Installation

Removal

1. Disconnect the negative battery cable.
2. Remove the headliner.
3. Remove the drain hoses.







4. Disconnect the electrical connectors.
5. Remove the screws and the motor.







6. Remove the motor control module.
7. Remove the bolts and the housing from the vehicle.







Installation

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the housing to the roof of the vehicle with the bolts.

Tighten:
Tighten the sunroof housing bolts to 10 Nm (89 in. lbs.).







2. Install the motor control module.
3. Install the motor with the screws.

Tighten:
Tighten the sunroof motor screws to 3 Nm (27 in. lbs.).

4. Connect the electrical connectors.







5. Install the drain hoses.
6. Install the headliner.
7. Connect the negative battery cable.