Ash Tray Lamp: Service and Repair

Ashtray and Cigar Lighter Lamp Removal and Installation

Ashtray and Cigar Lighter Lamp Removal

1. Disconnect the negative battery cable.
2. Remove the console cover.




3. Remove the screws and the ashtray housing.
4. Remove the bulb from the ashtray lamp housing.




5. Disconnect the bulb from the ashtray lamp housing electrical connector.

Ashtray and Cigar Lighter Lamp Installation

1. Connect the replacement bulb to the ashtray lamp housing electrical connector.




2. Install the replacement bulb into the ashtray lamp housing.
3. Install the ashtray housing with the screws.

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

Tighten:
Tighten the ashtray housing screws to 2.5 N.m (22 lb.in).

4. Install the console cover.




5. Connect the negative battery cable.