Engine Controls - Idle Relearn Procedure Correction
VERONASection Title: Engine
TSB No. TS 03 11244
Division: Automotive
Category: Technical
SUBJECT:
SERVICE MANUAL UPDATE IDLE RELEARN PROCEDURE
MODEL(S):
VERONA
YEAR:
2004-2005
CONDITION:
As stated in the appropriate Service Manual step 6 and 13 of the Idle Relearn Procedure" is incorrect.
CAUSE:
N/A
CORRECTION:
Step 6 will have a 5 second wait instead of 10.
Step 13 states If the vehicle is equipped with an automatic transaxle, apply the parking brake. While pressing the brake pedal, place the transaxle in D (drive)."
Step 13 should state If the vehicle is equipped with an automatic transaxle, apply the brake pedal, place the transaxle in P (park)."
(�:
Please update your Service Manual according to the sheet.
NOTE:
As stated in the appropriate Service Manuals this procedure is only required when a throttle body is replaced and/or Engine Control Module (ECM) is replaced or reprogrammed.
The labor time for Throttle Body replacement and/or ECM replacement or reprogramming includes this procedure.
Disclaimer