Transaxle Holding Fixture Assembly Disassembly and Assembly
Transaxle Holding Fixture Assembly Disassembly and AssemblyTools Required:
DW260-020 Transaxle Support Fixture
WARNING: To reduce the possibility of personal injury or transaxle damage, make sure, when doing the next step, that all of the bolts for the support fixture are installed as shown, and that the bolts are tightened to 11 Nm (98 inch lbs.).
1. Install the transaxle support fixture DW260-020 onto the transaxle.
2. Torque the support fixture bolts to 11 Nm (98 inch lbs.).
3. Position the transaxle with the rear cover facing up.