P0111

DTC P0111: Intake Air Temperature Circuit Range / Performance

Wiring Diagram:

Wiring Diagram

DTC Detecting Condition:

DTC Detecting Condition and Trouble Area

DTC Confirmation Procedure

NOTE: Check to make sure that the following conditions are satisfied when using this DTC Confirmation Procedure.
- Intake air temperature: -14 °C (6.8 °F) or higher
- Altitude (barometric pressure): 2500 m, 8202 ft or less (560 mmHg, 75 kPa or more)
- Engine coolant temp. at engine start: between -10 °C and 30 °C (14 °F and 86 °F)

1. With ignition switch turned OFF, connect scan tool.
2. Turn ON ignition switch, clear DTC using scan tool.
3. Start engine and warm up to normal operating temperature. (ECT approx. 90 - 95 °C, 194 - 203 °F)
4. Run engine at idle speed for 1 min. or more.
5. Check DTC and pending DTC.

Step 1 - 4:

Step 5 - 10:

DTC Troubleshooting