Condenser HVAC: Service and Repair

Condenser Assembly Removal and Installation

CAUTION: Be careful not to damage condenser fins. If condenser fin is bent, straighten it by using flat head screwdriver or pair of pliers.

Removal




1. Disconnect negative (-) cable at battery.
2. Recover refrigerant from A/C system.

NOTE: The amount of removed compressor oil must be measured for replenishing compressor oil.

3. Remove front bumper.
4. Remove hood lock cross member (1) and radiator stay bolts (2).
5. Disconnect discharge hose (3) and condenser outlet pipe (4) from condenser (5).

CAUTION: Keep internal parts of air conditioning system free from moisture and dirt. When disconnecting any line from system, install a blind plug or cap to the fitting immediately.

6. Remove condenser mounting bolts (6).
7. Remove condenser (5).

Installation
Reference: Condenser Assembly Inspection:Manual Type

Reverse removal procedure to install condenser noting the following instructions.
- Replenish specified amount of compressor oil to compressor suction side.
- Evacuate and charge refrigerant.
- Sufficiently apply compressor oil to fitting surface of O-ring and pipe.