Ignition Coil: Service and Repair

Ignition Coil Assembly (Igniter and Ignition Coil)




Removal
1. Disconnect ignition coil coupler.
2. Remove ignition coil bolt (1), and then pull out ignition coil (2).




Installation
1. Install ignition coil (2) securely.
2. Tighten ignition coil bolt (1), and then connect ignition coil coupler.

Tightening Torque
Ignition coil bolt (a): 3 N.m (0.3 kg-m, 2.5 lb-ft)