Ignition Switch: Service and Repair
Ignition Switch Removal and InstallationRemoval
1. Disconnect negative cable at battery.
2. Confirm that ignition key is removed.
3. Remove steering column hole cover (1).
4. Remove steering column covers (2), and then turn steering wheel to remove steering column cover screws (3).
5. Remove steering column mounting nuts.
6. Disconnect couplers from ignition switch (1).
7. Remove ignition switch (1) from key cylinder (2).
Installation
Reference: Ignition Switch Inspection
Reverse removal procedure noting the following.
- Tighten steering column mounting nuts.