Front Mounting Removal and Installation

Rear Differential Front Mounting Removal and Installation
Removal
1. Hoist vehicle.





2. Remove mounting bracket bolts (1), mounting bolt (2), nut (3) and differential front mounting (4).





3. Drive mounting out with special tools and hydraulic press (1).
Special Tool
(A): 09951-16080
(B): 09951-26020

Installation





1. Press mounting in front mounting bracket (1) by using special tools and hydraulic press (2) with caring its installation position shown in figure.
Special Tool
(A): 09951-16080
(B): 09951-26020





2. Install differential front mounting (1), and tighten mounting bracket bolts (2) and mounting nut (3) to specified torque.
Tightening torque
Differential front mounting bracket bolts (a): 50 Nm (5.0 kgf-cm, 36.5 ft. lbs.)
Differential front mounting nut (b): 80 Nm (8.0 kgf-cm, 58.0 ft. lbs.)