Tail Lamps Removal and Installation (For STATION WAGON Model)

Tail Lamps Removal and Installation (For STATION WAGON Model)

Removal
1. Disconnect the negative battery cable.
2. Remove the tail lamp assembly screws.
3. Remove the tail lamp assembly.
4. Remove the bulbs.





Installation

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the rear combination lamps assembly.
2. Install the rear combination lamps screws.

Tighten: Tighten the rear combination lamps screws to 3 Nm (27 lb.in).

3. Connect the negative battery cable.