Restraints - Except Advanced Air Bag

DTC B1073 / B1075 Side Sensor (Driver / Passenger Side) Correspondence Abnormality

Wiring Diagram:

Wiring Diagram

CAUTION:
- Be sure to perform Air Bag Diagnostic System Check:Except Advanced Air Bag before starting diagnosis according to flow table. Air Bag Diagnostic System Check
- When measurement of resistance or voltage is required in this table, use a specified digital multimeter (Refer to Special Tool:Except Advanced Air Bag.) along with a correct terminal adapter from special tool (Connector test adapter kit).
- When a check for proper connection is required, refer to Inspection of Intermittents and Poor Connections:Except Advanced Air Bag. Inspection of Intermittents and Poor Connections
- If there is open circuit in the air bag wire harness, connector or terminal is found damaged, replace the wire harness, connector and terminal as an assembly.

DTC Will Set when
Side sensor abnormal signal is detected by SDM.

Flow Test Description
STEP 1 to 4: Check side sensor circuit in floor harness.

Step 1:

Step 2:

Step 3:

Step 4:

DTC Troubleshooting