Restraints - Advanced Air Bag

DTC B1083 / B1093 (No.1083 / 1093): Driver / Passenger Side Sensor Circuit Short to Ground

Wiring Diagram:

Wiring Diagram

CAUTION:
- Be sure to perform Air Bag Diagnostic System Check:Advanced Air Bag before starting diagnosis according to flow. Air Bag Diagnostic System Check
- When measurement of resistance or voltage is required in this flow, use a tester along with a correct terminal adapter from special tool (Connector test adapter kit).
- When a check for proper connection is required, refer to Inspection of Intermittent and Poor Connections:Advanced Air Bag. Inspection of Intermittent and Poor Connections
- If there is open circuit in the air bag wire harness, connector or terminal is found damaged, replace the wire harness, connector and terminal as an assembly.

DTC Will Set when
The resistance measured between aide sensor circuit and ground circuit is below a specified value for specified time.

Flow Test Description
STEP 1: Check for short circuit between forward sensor circuit and ground.
STEP 2: Check if malfunction is in side sensor.

Step 1 - 2:

DTC Troubleshooting