DTC 33

DTC P1700 (No. 32 / 33): Throttle Position Signal Circuit Malfunction

Wiring Diagram








DTC Detecting Condition and Trouble Area

DTC Detecting Condition and Trouble Area:

DTC Confirmation Procedure
1. Connect scan tool to DLC with ignition switch OFF.
2. Clear DTCs in TCM and ECM memories by using scan tool.
3. Turn ignition switch ON.
4. Depress accelerator pedal fully and keep it for 10 seconds.
5. Release accelerator pedal and start engine.
6. Run engine at idle for 20 seconds.
7. Check DTC, pending DTC and freeze frame data.

DTC Troubleshooting

Steps 1-3:

Steps 4-5: