Transmission Control System
DTC P0713 (No. 36): Transmission Fluid Temperature Sensor Circuit HighWiring Diagram
DTC Detecting Condition and Trouble Area
DTC Detecting Condition and Trouble Area:
DTC Confirmation Procedure
WARNING:
^ When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
^ Road test should be carried out with 2 persons, a driver and tester, on a level road.
1. Connect scan tool to DLC with ignition switch OFF.
2. Clear DTCs in TCM and ECM memories by using scan tool and start engine.
3. Shift selector lever to "D" range and drive vehicle for 20 minutes or more.
4. Stop vehicle.
5. Check DTC, pending DTC and freeze frame data.
DTC Troubleshooting
Steps 1-4:
