Forward and Direct Clutch Preliminary Check
Forward and Direct Clutch Preliminary CheckReference: Automatic Transaxle Unit Disassembly
Reference: Automatic Transaxle Unit Assembly
1. Install forward and direct clutch assembly (1) to transaxle rear cover (2).
2. Measure forward clutch piston stroke while applying and releasing compressed air (400 - 800 kPa, 4 - 8 kg/cm2, 57 - 113 psi) through oil hole (3) by using special tools.
If measured piston stroke exceeds specified value, disassemble and inspect inner parts.
Special Tool
(A): 09900-20607
(B): 09900-20701
Forward clutch piston stroke
Standard: 1.52 - 1.89 mm (0.059 - 0.074 inch)
3. Measure direct clutch piston stroke while applying and releasing compressed air (400 - 800 kPa, 4 - 8 kg/cm2, 57 - 113 psi) through oil hole (1) by using special tools.
If measured piston stroke exceeds specified value, disassemble and inspect inner parts.
Special Tool
(A): 09900-20607
(B): 09900-20701
Direct clutch piston stroke
Standard: 1.52 - 1.89 mm (0.059 - 0.074 inch)
