Childproof Rear Door Lock Removal and Installation
Childproof Rear Door Lock Removal and InstallationRemoval
1. Disconnect the negative battery cable.
2. Remove the door seal trim.
3. Remove the rear sash inside door.
4. Remove the door lock screws.
5. Disconnect the lock rods.
6. Remove the door lock.
7. Disconnect the electrical connector.
Installation
1. Connect the electrical connector.
2. Install the rear door lock with the screws.
Tighten: Tighten the rear door lock screws to 8 Nm (71 in. lbs.).
3. Install the lock rods.
4. Install the rear sash inside door.
5. Install the door seal trim.
6. Connect the negative battery cable.