Insufficient Cooling Quick Check Procedure

Insufficient Cooling "Quick Check" Procedure

Perform the following "hand-feel" procedure to get a quick idea of whether the A/C system has the proper charge of Refrigerant-134a. The air temperature must be above 21 degrees C (70 degrees F) for most models.
1. Warm up engine. Run the engine at idle.
2. Open the hood and all the doors.
3. Turn the A/C switch ON.
4. Set the temperature control to the full cold position.
5. Set the blower speed switch on the maximum speed setting.
6. "Hand-feel" the temperature of the evaporator outlet pipe. The pipe should be cold.
7. Check for other problems. Refer to Testing the Refrigerant System. Testing the Refrigerant System
8. Leak check the system. Refer to Leak Testing Refrigerant System. If you find a leak, discharge the system and repair the leak as required. After completing the repair, evacuate the system and charge it. Leak Testing Refrigerant System
9. If there is no leak, refer to Insufficient Cooling Diagnosis. Insufficient Cooling Diagnosis