Daytime Running Lamp Control Unit: Service and Repair
Daytime Running Lamp Module Removal and InstallationRemoval
1. Disconnect the negative battery cable.
2. Remove the instrument panel under cover and the knee bolster.
3. Remove the bolts and the daytime running lamp module.
4. Disconnect the electrical connector.
Installation
1. Connect the electrical connector.
2. Install the daytime running lamp module with the bolts.
Tighten: Tighten the daytime running lamp module bolts to 2 Nm (18 in. lbs.).
3. Install the instrument panel under cover and the knee bolster.
4. Connect the negative battery cable.
