Sun Visor: Service and Repair

Sun Visors With Vanity Mirror Removal And Installation

Removal

1. Remove the screws and the sun visor from the headliner.
2. Disconnect the vanity mirror electrical connector.
3. Remove the screw and the sun visor support from the headliner.







Installation

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the sun visor support to the headliner with the screw.

Tighten:
Tighten the sun visor support screw to 1.5 Nm (13 in. lbs.).

2. Connect the vanity mirror electrical connector.
3. Install the sun visor to the headliner with the screws.

Tighten:
Tighten the sun visor screws to 4 Nm (35 in. lbs.).