Fog/Driving Lamp: Service and Repair

Front Fog Lamps Removal and Installation

Removal
1. Disconnect the negative battery cable.
2. Remove the bolts and the front fog lamp.
3. Disconnect the electrical connector.





4. Remove the fog lamp access cover.
5. Remove the retaining wire.
6. Remove the bulb.





Installation
1. Install the bulb.
2. Install the retaining wire.
3. Install the fog lamp access cover.





4. Connect the electrical connector.
5. Install the front fog lamp with the bolts.

Tighten: Tighten the front fog lamp bolts to 4 Nm (35 in. lbs.).

6. Connect the negative battery cable.