Rear Suspension

Stabilizer Shaft Removal and Installation
Removal
1. Raise and suitably support the vehicle.
2. Remove the stabilizer shaft clamp bolts.
3. Remove the stabilizer shaft-to-stabilizer link nut.





4. Remove the stabilizer shaft clamps, the insulators, and the stabilizer shaft from the vehicle.

Installation
1. Install the stabilizer shaft, the insulators, and the stabilizer shaft clamps.
2. Install the stabilizer shaft-to-stabilizer link nut.
^ Tighten the stabilizer shaft-to-stabilizer link nut to 47 Nm (35 ft. lbs.).





3. Install the stabilizer shaft clamp bolts.
^ Tighten the stabilizer shaft clamp bolts to 40 Nm (30 ft. lbs.).
4. Lower the vehicle.