Changing the Fluid
Changing the FluidTools Required:
^ DW260-070 Plug Remover/Installer
1. Disconnect the negative battery cable.
2. Raise and suitably support the vehicle.
3. Place a fluid container below the fluid drain plug.
4. Remove the transaxle fluid drain plug using the plug remover/installer DW260-070.
5. Adding transaxle fluid.
6. Install the transaxle fluid drain plug using the plug remover/installer DW260-070.
Tighten:
Tighten the Transaxle Fluid Drain Plug to 45 Nm (33 ft. lbs.).
7. Connect the negative battery cable.
