Operation CHARM: Car repair manuals for everyone.

Courtesy Lamp: Service and Repair

Interior Courtesy Lamp Removal and Installation

Interior Courtesy Lamp Removal

1. Disconnect the negative battery cable.
2. Pry off the courtesy lamp lens by inserting a screwdriver into the recess along the edge of the lens.
3. Remove the screws and the courtesy lamp housing from the headliner.
4. Disconnect the electrical connector.




5. Remove the bulb.

Interior Courtesy Lamp Installation

1. Install the replacement bulb.
2. Connect the electrical connector.

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

3. Install the interior courtesy lamp housing to the headliner with the screws.

Tighten:
Tighten the interior courtesy lamp housing screw to 2 N.m (18 lb.in).

4. Press the interior courtesy lamp lens onto the housing.




5. Connect the negative battery cable.