Operation CHARM: Car repair manuals for everyone.

Parking Lamp: Service and Repair

Parking and Front Turn Signal Lamps Removal and Installation

Parking and Front Turn Signal Lamps Removal

1. Disconnect the negative battery cable.
2. Remove the lamp. Refer to Headlamps Removal.




3. Twist and remove the bulbs from the headlamp.

Parking and Front Turn Signal Lamps Installation

1. Insert and twist to install the replacement bulb into the headlamp.
2. Connect the electrical connector.

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

3. Install the headlamp. Refer to Headlamps Removal.




4. Connect the negative battery cable.