Valve Body Disassembly and Assembly
Valve Body Disassembly and Assembly1. Remove the oil pan bolts and oil pan.
2. Remove the oil pan gasket.
Installation Notice
Tighten the oil pan bolts to 6 Nm (53 inch lbs.).
3. Remove valve body fixing bolts and transaxle input speed sensor bolt on the valve body.
4. Remove the holder for the transaxle input speed sensor.
Installation Notice
Tighten the bolts to 8 Nm (71 inch lbs.).
5. Tilt the valve body.
6. Remove the fastening screw for the output speed sensor under the valve body assembly.
7. Lever the cable out of the retaining clip and pull out the output speed sensor.
8. Installation should follow the removal procedure in the reverse order.
Installation Notice
Tighten the screw to 6 Nm (53 inch lbs.).