Front Door Window Regulator: Service and Repair

Power Window Regulator Removal and Installation

Power Window Regulator Removal

1. Disconnect the negative battery cable.
2. Remove the door glass. Refer to Stationary Glass.
3. Disconnect the electrical connector.




4. Remove the nuts and the window regulator.

Power Window Regulator Installation

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the window regulator with the nuts.

Tighten:
Tighten the window regulator nuts to 10 N.m (89 lb.in).

2. Connect the electrical connector.
3. Install the door glass. Refer to Stationary Glass.




4. Connect the negative battery cable.