DTC 1072

DTC B1072 / B1076 (No.1072 / 1076): LH / RH Forward Sensor Communication Error

DTC Will Set when
Forward sensor abnormal signal is detected by SDM.

DTC Troubleshooting
1. Turn ignition switch OFF.
2. Replace applicable forward sensor referring to Forward Sensor Removal and Installation: Advanced Air Bag.
3. Repeat Air Bag Diagnostic System Check: Advanced Air Bag.

NOTE: Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Clear DTCs referring to DTC Clearance for SDM: Advanced Air Bag and DTC Clearance for OCM: Advanced Air Bag, if any.
- Repeat Air Bag Diagnostic System Check: Advanced Air Bag to confirm that the trouble has been corrected.