DTC 1085

DTC B1085 / B1095 (No.1085 / 1095): Wrong Side Sensor (Driver Side / Passenger Side) ID

DTC Will Set when
SDM receives wrong ID (Part No.) signal from side sensor.

DTC Troubleshooting
1. Turn ignition switch OFF.
2. Replace applicable side sensor referring to Side Sensor Removal and Installation: Advanced Air Bag.
3. Repeat Air Bag Diagnostic System Check: Advanced Air Bag.

NOTE: Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Clear DTCs referring to DTC Clearance for SDM: Advanced Air Bag and DTC Clearance for OCM: Advanced Air Bag, if any.
- Repeat Air Bag Diagnostic System Check: Advanced Air Bag to confirm that the trouble has been corrected.