P0444

DTC P0444: Evaporative Emission System Purge Control Valve Circuit Open

Wiring Diagram:

Wiring Diagram

DTC Detecting Condition And Trouble Area:

DTC Detecting Condition and Trouble Area

DTC Confirmation Procedure
1. With ignition switch OFF, connect scan tool to DLC.
2. Turn On ignition switch and clear DTC using scan tool.
3. Start engine and run engine at idle speed (600 rpm or more) for 1 minute with all electric loads turned OFF.
4. Check DTC and pending DTC.

Step 1-6:

Step 7:

DTC Troubleshooting

WARNING: In order to reduce risk of fire and personal injury, this work must be performed in a well ventilated area and away from any open flames such as gas water heater.