Idle Speed/Throttle Actuator - Electronic: Service and Repair

Idle Air Control (IAC) Valve Removal and Installation

Reference: Idle Air Control (IAC) Valve Operation Check

Removal
1. Remove throttle body from intake manifold.




2. Remove IAC valve (1) from throttle body.

Installation
Reference: Idle Air Control (IAC) Valve Inspection




For installation, reverse removal procedure noting the followings:
- Install new gasket (1) to throttle body.
- Tighten IAC valve screw to specified torque.

Tightening torque
IAC valve screw a: 4.0 N.m (0.4 kg-m, 3.0 lb-ft)

- Install throttle body to intake manifold.