Without Scan Tool

DTC Clearance

Not using SUZUKI scan tool




1. Turn ignition switch to ON position and wait about 6 seconds or more.
2. Using service wire (4), repeat shorting and opening between diagnosis switch terminal (3) on "AIR BAG" monitor coupler (1) and body ground (2) 5 times at about 1 second intervals within 10 seconds.
3. Perform DTC Check: Except Advanced Air Bag and confirm that normal DTC (DTC No. 12) is displayed and not malfunction DTC.

NOTE: If DTC B1051, B1058 or B1071 is stored in SDM, it is not possible to clear it.