One-Way No. 1 Clutch Disassembly and Reassembly
One-Way No. 1 Clutch Disassembly and ReassemblyReference: Automatic Transaxle Unit Disassembly
Reference: Automatic Transaxle Unit Assembly
Reference: One-Way No. 1 Clutch Operation Check
Reference: One-Way No. 1 Clutch Components
Disassembly
1. Remove one-way No. 1 clutch rear thrust washer (1).
2. Remove one-way No. 1 clutch inner race (1) and one-way No. 1 clutch front thrust washer (2).
3. Remove one-way No. 1 clutch (3) from one-way No. 1 clutch outer race (4).
Reassembly
Reference: One-Way No. 1 Clutch Inspection
1. Install one-way No. 1 clutch (3) into one-way clutch outer race (4).
2. Fit washer (2) to inner race (1) with petroleum jelly so as not to fall washer off when assembling.
3. Install rear thrust washer (1) onto one-way No. 1 clutch outer race (2).
4. Check that one-way No. 1 clutch (1) turns freely when turned counterclockwise [A] and looks when turned clockwise [B].
