Front Bumper Impact Bar Removal and Installation

Front Bumper Impact Bar Removal And Installation

Removal

1. Disconnect the electrical connector.
2. Remove the front bumper fascia.
3. Remove the front bumper energy absorber.
4. Remove the bolts and the front bumper impact bar.







Installation

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the front impact bar with the bolts.

Tighten:
Tighten the front impact bar bolts to 39 Nm (29 ft. lbs.).

2. Install the front bumper energy absorber.
3. Install the front bumper fascia.
4. Connect the electrical connector.