Cowl Moulding / Trim: Service and Repair

Cowl Vent Grille Removal And Installation

Removal

1. Raise the hood and support it with the hood prop.
2. Remove the weatherstrip.
3. Remove the wiper arms.
4. Remove the cowl vent grille screws and the two-piece grille.







Installation

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the two-piece grille and the cowl vent grille screws.

Tighten:
Tighten the cowl vent grille screws to 4 Nm (35 in. lbs.).

2. Install the wiper arms.
3. Install the weatherstrip.