Rear Window Wiper Motor Removal and Installation (For STATION WAGON Model)

Rear Window Wiper Motor Removal and Installation (For STATION WAGON Model)

Removal
1. Disconnect the negative battery cable.
2. Remove the rear window wiper arm.
3. Remove the station wagon door trim cover. Refer to Tailgate Lower Garnish Molding Removal and Installation.
4. Remove the bolts and the rear wiper motor.




5. Disconnect the electrical connector.

Installation
1. Connect the electrical connector.
2. Install the rear wiper motor with the bolts.

Tighten: Tighten the rear wiper motor bolts to 9 Nm (80 in. lbs.).

3. Install the station wagon door trim cover. Refer to Tailgate Lower Garnish Molding Removal and Installation.
4. Install the rear window wiper arm.




5. Connect the negative battery cable.