Front Door Limiter: Service and Repair

Door Hold-Open Link Removal And Installation

Removal

1. Remove the door seal trim.
2. Remove the bolts on the door and on the body.
3. Remove the door hold-open link.







Installation

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the door hold-open link to the door and the body with the bolts.

Tighten:
Tighten the door hold-open link-to-body bolt to 25 Nm (18 ft. lbs.).
Tighten the door hold-open link-to-door bolts to 9 Nm (80 in. lbs.).

2. Install the door seal trim.