Outside Rearview Mirrors Removal and Installation

Outside Rearview Mirrors Removal And Installation

Removal

1. Remove the window frame inner cover.
2. Disconnect the mirror electrical connector if the mirror is electronically controlled.
3. Remove the bolts and the outside rearview mirror assembly from the door.







Installation

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the outside rearview mirror assembly to the door with the screws.

Tighten:
Tighten the outside rearview mirror assembly screws to 4.5 Nm (40 in. lbs.).

2. Connect the mirror electrical connector if the mirror is electronically controlled.
3. Install the window frame inner cover.