Air Door Cable: Service and Repair
Temperature Control Cable Removal and InstallationRemoval
1. Disconnect the negative battery cable.
2. Remove the center molding.
3. Disconnect the mode control cable from the mode
4. Disconnect the temperature control cable eyelet from the post on the controller.
5. Pry off the clip of the temperature control cable.
6. Slide the cable eyelet off the post on the temperature door lever.
7. Pry off the Clip of the temperature cable.
Installation
1. Install the temperature control cable eyelet to the post on the temperature door lever.
2. Install the clip of the temperature cable.
3. Install the temperature control cable eyelet to the post on the controller.
4. Install the clip of the temperature control cable.
5. Install the mode control cable to the mode door.
6. Insert the center molding into position on the instrument panel.
7. Move the temperature control to verify the smooth operation and function of the door and the cable.
8. Connect the negative battery cable.
9. Operate the heating and cooling systems to verify proper function.