Rear Parallel Link Removal and Installation
Rear Parallel Link Removal and InstallationRemoval
1. Raise and suitably support the vehicle.
2. Remove the wheel.
3. Remove the rear parallel link bolt from the rear crossmember.
4. Remove the rear parallel link bolt from the rear knuckle.
5. Remove the rear parallel link.
Installation
1. Install the rear parallel link.
2. Install the rear parallel link-to-knuckle bolt.
^ Tighten the rear parallel link-to-knuckle bolt to 120 Nm (89 ft. lbs.).
3. Install the rear parallel link onto the rear crossmember. Install the rear parallel link-to crossmember bolts.
^ Tighten the rear parallel link-to-crossmember bolt to 90 Nm (66 ft. lbs.).
4. Install the wheel.