Brake C/D Disassembly and Assembly

Brake C/D Disassembly and Assembly

Tools Required:
DW260-160 Brake C/D Snap Ring Remover/Installer

1. Take snap ring out of transaxle housing.





2. Release cylinder with piston C by applying compressed air to the feed bore.





3. Remove cylinder with piston C.





4. Take disc carrier C/D and spring disc out of transaxle housing.





5. Release cylinder with piston D by applying compressed air to the feed bore.





6. Remove cylinder with piston D.





7. Separate between piston C and cylinder C.





8. Take snap ring out of brake C.





9. Remove the disc set C.
Installation Notice
^ Transaxle has two lined clutch discs and one steel clutch disc. The lined discs must be installed in such a way that the lining faces the steel disc.
^ Insert the fitting keys into the appropriate grooves.





10. Turn the disc carrier C/D by 180°.
11. Using assembly bracket Press down cup spring and take out the snap ring.





12. Remove the disc set D.
13. Installation should follow the removal procedure in the reverse order.