Rear Window Wiper Arm Removal and Installation (For STATION WAGON Model)

Rear Window Wiper Arm Removal and Installation (For STATION WAGON Model)

Removal
1. Open the wiper arm access cap.




2. Remove the nut and the rear wiper arm.

Installation

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the rear wiper arm with the nut.

Tighten: Tighten the rear wiper arm nut to 11 Nm (97 in. lbs.).




2. Close the wiper arm access cap.