Brake Pedal Free Height Inspection
Brake Pedal Free Height Inspection1. Check brake pedal free height. If it is not within specification, check and adjust following item 2) and 6).
Brake pedal free height "a" from carpet: 111 - 131 mm (4.4 - 5.1 in.)
2. Check measurement between booster mounting surface and center of clevis pin hole. When booster push rod clevis has been reinstalled, it is important that the measurement is adjusted (refer to Brake Booster Inspection). Brake Booster Inspection
3. Check brake light switch position. Adjust it if it is out of specification.
4. Check pedal for dent.
5. Check brake booster for installation.
6. Check brake booster push rod for length.