Solar Sensor: Service and Repair
Sunload Sensor Removal and InstallationRemoval
1. Disconnect negative (-) cable at battery.
2. Remove combination meter from instrument panel referring to Combination Meter Removal and Installation.
3. Remove sunload sensor (1) from instrument panel by depressing tab and pushing sensor upward from underneath.
4. Disconnect sunload sensor connector (2).
Installation
Reference: Sunload Sensor Inspection:Automatic Type
Reverse removal procedure noting the following instructions.
^ Install sunload sensor (1) to instrument panel fitting tab (2) of sunload sensor into the groove (3) of instrument panel as shown in figure.