Planetary Gear Inspection
Planetary Gear InspectionRear Planetary Ring Gear Assembly
Visually check the following parts for scratches or discoloration.
^ Inner surface of planetary ring gear.
Planetary Front Gear
Measure inside diameter of planetary front gear (1) bushing, using special tools. If inside diameter exceeds limit, replace planetary front gear.
Planetary front gear bushing inside diameter limit 30.13 mm (1.186 in.)
Special Tool
(A): 09900-20607
(B): 09900-22403
NOTE: Perform measurement at several points.
Planetary Sun Gear
Measure inside diameter of planetary sun gear (1) bushing, using special tools. If inside diameter exceeds limit, replace planetary sun gear.
Planetary sun gear bushing inside diameter limit 21.58 mm (0.849 in.)
Special Tool
(A): 09900-20607
(B): 09900-22403
NOTE: Perform measurement at several points.
