Rear Axle Bush Inspection

Rear Axle Bush Inspection

Inspect for cracks, deformation or damage. If necessary, replace rear axle assembly.

Rear Wheel Disc, Bolt and Bearing Inspection
^ Check tightness of wheel nuts and, if necessary, retighten to specified torque.
^ Check wheel disc deformation, damage, crack and etc.
Replace defective disc with new one.
^ Check installation face inside of wheel disc for rust.
As rust affects adversely, remove it thoroughly.
Tightening torque
Wheel nut: 85 Nm (8.5 kgf-m, 61.5 ft. lbs.)
^ Check wear of wheel bearings. When measuring thrust play, apply a dial gauge to axle shaft center. When the thrust play exceeds limit, replace bearing.
Thrust play limit "a": 0.1 mm (0.004 in.)





^ Check noise and smooth rotation of wheel by rotating wheel. If it is defective, replace bearing.