Forward and Direct Clutch Preliminary Check
Forward and Direct Clutch Preliminary Check1. Install forward and direct clutch assembly (1) to transaxle rear cover (2).
2. Measure forward clutch piston stroke while applying and releasing compressed air (400 - 800 kPa, 4 - 8 kg/cm2, 57 - 113 psi) through oil hole (3) by using special tools.
If measured piston stroke exceeds specified value, disassemble and inspect inner parts.
Special Tool
(A): 09900-20607
(B): 09900-20701
Forward clutch piston stroke
Standard: 1.52 - 1.89 mm (0.059 - 0.074 in.)
3. Measure direct clutch piston stroke while applying and releasing compressed air (400 - 800 kPa, 4 - 8 kg/cm2, 57 - 113 psi) through oil hole (1) by using special tools.
If measured piston stroke exceeds specified value, disassemble and inspect inner parts.
Special Tool
(A): 09900-20607
(B): 09900-20701
Direct clutch piston stroke
Standard: 1.52 - 1.89 mm (0.059 - 0.074 in.)
