Front Suspension

Stabilizer Shaft and Insulators Removal and Installation
Removal
1. Raise and suitably support the vehicle.
2. Remove the stabilizer shaft-to-stabilizer link nut.





3. Remove the crossmember.
4. Remove the stabilizer shaft-to-crossmember clamp bolts.





5. Remove the stabilizer shaft, the stabilizer shaft insulator clamp, and the insulators from the vehicle.

Installation
1. Install the stabilizer shaft.





2. Install the stabilizer shaft insulator clamps, the stabilizer shaft clamp bolt, and the insulators onto the crossmember. Do not tighten the bolt.
3. Install the stabilizer link onto the stabilizer shaft and connect them with the stabilizer shaft to-stabilizer link nut.
^ Tighten the stabilizer shaft-to-stabilizer link nut to 47 Nm (35 ft. lbs.).
^ Tighten the stabilizer shaft-to-crossmember clamp bolts to 25 Nm (18 ft. lbs.).





4. Install the front wheels.