P0752

DTC P0751 / P0752: Shift Solenoid "A" Performance or Stuck OFF / Shift Solenoid "A" Stuck ON

DTC Detecting Condition and Trouble Area





DTC Confirmation Procedure

WARNING:
^ When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
^ Road test should be carried out with 2 persons, a driver and a tester, on a level road.

1. Clear DTC.
2. Start engine and it up to normal operating temperature.
3. Shift select lever to "D" range and hold it for 20 seconds or longer.
4. Drive vehicle and increase vehicle speed to 40 km/h (25 mile/h) or more for longer than 15 seconds.
5. Stop vehicle and turn ignition switch OFF.
6. Repeat Step 3) to 5).
7. Check DTC, pending DTC and freeze frame data.

DTC Troubleshooting

Step 1-Step 2: